Being in the manufacturing industry, you know that virtually every process creates some type of dust, mist or fume. It is important to protect employees and equipment on a day-to-day basis. Air filtration started in industrial facilities to protect the HVAC system and increase the yield in processes, thereby increasing profit dollars.
Large particles produced from machinery, fine particles consistent with any process that involves high activity in process or with people and gaseous contaminants are all problems that may be addressed with air filtration. Here we can show you how to protect your workers, equipment and processes in any facility.
Energy Cost Index (ECI) Star Rating System set the standards for air filter performance. The more stars means better air filter performance and higher energy savings. Get recognized for saving energy, shrinking waste, reducing carbon footprint and improving indoor air quality.
Electronics and optics Food and beverage Take a Breath Life science and healthcare Air quality Commercial and public buildings Case studies Education and experience Sustainability Manufacturing and machinery Virus Contamination Control
Processes in manufacturing facilities often generate dust and fumes which for example can pose health risks for your operators or compromise the quality and safety of your products. Determining the right capture and filtration solution helps to protect against the main risks of uncontrolled emissions and thus to create safe work environments.
Food and beverage Life science and healthcare Air quality Manufacturing and machinery
Welding, grinding and laser/plasma cutting processes produce huge amounts of fine PM1 particles and various harmful gases that cannot be removed from the indoor air by ventilation alone.
Dyna Mig had a competitor dust collector solution that regularly caused costly downtime. With the help of Camfil’s expertise and a flagship Camfil Gold Series GSX dust collector system, Dyna Mig was able to eliminate all unscheduled downtime and cut their heating costs to a minimum – as well as work safer.
Camfil has provided container manufacturer AMG with a much more effective dust and fume extraction system offering higher filtration rates. A system that is also more sustainable thanks to reduced energy consumption and longer filter lifetime.
S.Silpa Co., Ltd., Thailand faced constant odor nuisance and high VOC levels in their factory. This is due to the usage of various chemicals in the printing process that generate volatile organic compounds (VOCs) when exposed to heat, such as thinner solutions, alcohols, inks, cleaning solvents, vinyl sheets.
Low pressure drop GTC air filters minimize filter replacement requirements, improve power output, and lower fuel consumption.
Frequent pressure and short filter replacement intervals led to high operational costs. Camfil's Cam-Flo air intake pre-filters and CamGT EPA air filters met their goal of 8000 hours of life and reduced pressure drop by 50%.
Plant located in the Gulf Coast of Louisiana upgrades to the Cam-Flo pocket air filters and CamGT 4V-300 EPA E10 filters after tests show lower pressure drop, lower engine degradation, and signifcant savings as a result of filtration.
In the manufacturing industry air quality can be compromised by the production processes.
Hinkley Point C in Somerset, United Kingdom is amongst the safest and most efficient nuclear power generator that is type of a Pressurised Water Reactor (PWR). With hundreds of megawatts electrical production in planning, safety of the process becomes a key concern.
A repeal of the Clean Power Plan, lead by no less than the Environment Protection Agency (EPA) itself, could very well drive a spike in demand for commercial air filters.
During the process of removing the four, 28 meter high boilers, a lot of environmentally harmful materials must be handled, and the demolition process will create dust and smoke, which cannot be spread outside the building.
Case Study: Gold Series Blasts Competitor Dust Collector. JPW Companies offers a wide variety of products built to last for manufacturing companies. Installed on a blasting machine, JPW Companies originally installed a competitor's dust collector to manage the facility.
Clean Air For Leading Beverage Manufacturer. Air is the only ingredient involved in every aspect of food and beverage manufacturing. Air comes into contact with products from storage of goods all way to packaging. How can we help to keep your food processes safe?
USA