CamCarb VC

A compact V-cell molecular filter with disposable panels filled with Camfil activated alumina or activated carbon. The compact filter can be installed in supply, recirculation, and exhaust air systems in commercial and industrial facilities to adsorb molecular contaminants in non-critical applications.

Disposable V-Cell filter
Reduced media bed density when a lower pressure drop is required
Compact design for non-critical applications
Maximum face velocity of 500 fpm
Easily installed in standard HVAC systems
Typical target gases: ozone, nitrogen dioxide, sulfur dioxide, hydrocarbons, VOCs, hydrogen sulfide and other acids.

Specifications

Application

Reduction of modest occupancy odor loads, peak-shaving* of ambient air pollutants, and continuous control of low-level gaseous contaminants in make-up and air recirculation applications.

Filter Frame

Galvanized steel, Plastic molded

Media

Activated Carbon, Impregnated Activated Carbon, Impregnated Activated Alumina

Installation options

Front access frames and side access housings are available. See related products below.

Comment

One (1) filter is applied per 24" x 24" (610 x 610mm) opening.
Maximum face velocity: 500 fpm (2.5 m/s).
Can be filled with any loose-fill molecular media.

Max temperature (°C)

Max Temperature (°F)

122

GlidePack MultiTrack 25 Air Filter Housing

Replaceable fin seal polypropylene final filter gasketing to ensure a secure filter to track seal of less than 1% across the filter at 3.0” w.g.

16-gauge galvanized steel construction with convenient out-turned standing flanges to mate to existing HVAC equipment. The flanges include moisture weeping paths so that housings are weatherproof without modification for rooftop or exterior installation. Flanges are designed to mate with other Camfil housings for those applications that may require multiple filter housings.

16-gauge galvanized steel dual-access doors for filter service from either side of the unit. The doors swing-open and engineered to be square to the housing flange to maintain a continuous door-to-housing seal.

GlidePack UniTrack 25

A 1-inch nominal size filter header track, that will hold bag filters, 6-inch deep box filters, 12-inch deep box filters.

A replaceable fin seal polypropylene filter gasket on each filter track to ensure a secure filter-to-track seal of less than 1% across the filter at 3.0” w.g.

FastFrame

16-gauge all-welded galvanized steel construction. Available in stainless steel or aluminum.

A ¾-inch sealing flange with a premium replaceable gasket to ensure no air bypass between the frame and the air filter header. The gasket includes an overlapping seal to eliminate air bypass at the frame's corners.

Final filter and prefilter compression tabs facilitate a clear snap-in-place seal for the final filter and a secure hold for the prefilter.