Gas turbines are highly efficient, sensitive machines that can be used to generate electricity or as a mechanical drive to power different processes. They are used all over the world in environmental and operational conditions that can vary drastically. That's why the filter solution should be adapted to offer adequate protection.
In the power generation industry, site-specific air filtration will ensure maximum efficiency for base load plants, and worry-free ownership for peaker plants. As renewable energy increases, the market competitiveness for generators and gas turbines needs to be more efficient to maintain profitability. Camfil smart air filtration solutions are designed to provide the highest profitability.
With narrow spark spread and increased competitiveness, base-load plants can improve margins by protecting their gas turbine with adapted EPA filtration. As every gain in efficiency means longer run time and higher profitability, our filtration solutions are designed to maintain the engine in pristine condition and increase fuel efficiency. As base load plants are critical to the grid, our reliable and long-life EPA filtration solutions enable you to increase availability and reliability.
Peakers have to go online quickly, often without notice. Our high-performance, robust filter solutions ensure that you can ramp up anytime. When availability on-demand is vital, reliable solutions allow you to operate at the highest fuel efficiency with the lowest emissions, enabling long-term prosperity.
In O&G applications, whether on offshore production platforms, fracking sites or refineries, turbines often face the challenge of a variety of aggressive contaminants like salt, heavy hydrocarbons or aggressive gases. In critical processes, these challenges need to be taken seriously. Backed by more than 50 years of experience, our solutions are flexible and optimised for each application, from compact EPA solutions offshore, to mobile units on fracking sites, to molecular solutions when subjected to corrosive gas. If you have specific requirements, there's a good chance we have the industry experience to help you.
With test rigs that mimic extreme conditions, from salt & water spray to high air flows and high burst pressure, our R&D group is focused on ensuring reliability. We challenge our products in real site conditions using our mobile testing trailers, the CamLabs, and are always ready to show you actual performance data. Our patented solutions like the CamGT 3V-600 have pushed the industry limits when it comes to water handling capability, salt removal efficiency and lower operating pressure drop. When reliability is critical, your air filters should be just as dependable.
We strive to understand air and local conditions better than anyone else. A little obsessive? Maybe. But, when up to 98% of what goes into your equipment is air, we believe it’s a good thing. By providing the facts you need to empower your decisions, you can optimise output and efficiency. As the most predictable air solutions provider, Camfil keeps your equipment working better and longer, while removing the element of surprise. We help you stay in control.
If you are designing a new system or simply looking to improve your current performance, ask us about our life cycle cost software, our air sampling solutions or for a CamLab test.
In rural and agricultural sites, turbines require protection from seasonal contaminants and small particles. Fouling is caused by particles under 1 micron and even in apparently clean environments, EPA filtration is a must-have performance booster.
In dry, coarse dust environments, maintaining low pressure drop and long filter life are key to increasing availability. When sites are also challenged with fine particulates, salt or corrosive contaminants, combined systems offer improved protection.
Coastal and tropical climates present the added risk of water ingress. Soluble particulate carry-over increases the risk of fouling and corrosion, especially if salt is present. Multi-stage, built-in drainage and final hydrophobic EPA filtration is recommended.
Offshore installations must manage salt, water ingress and fine particulates from equipment exhaust. They face stringent footprint restrictions and logistical challenges. Multi-stage, built-in drainage and final hydrophobic EPA filtration is recommended.
Colder climates bring the added challenges of heavy snow and frost. Icing on filters can cause high pressure drop, and ice at the bell mouth can cause foreign object damage.
Industrial and urban sites endure fine corrosive particulates from combustion and industrial processes. Low-pressure, multi-stage EPA filtration is recommended as it will prevent fine particulates from fouling the turbine, maintaining its optimal performance.
A leading steel producer upgraded blower filtration, extending final filter life by 16x, pre-filter life by 4x, and achieving 100% operational availability.
Case studies Energy and Power SystemsGPSC Thailand upgraded the air filters on six of their gas turbines to TurboPulse T12 cartridge filters, achieving $520 000 USD savings annually, 166 000 MMBtu fuel reduction per year, 8 800 tons of CO2 reduction annually, and 3x improved compressor efficiency
Case studies Energy and Power Systems
Selecting the right filters to protect your gas turbine fleet can mean the difference between trouble-free, high-output operations and short filter life, de-rates and increased downtime.
Leveraging years of extensive data, new technologies have been engineered to form a new generation of pulse air filters. This eBook highlight the four innovative technologies designed to enhance the performance of your filters and your gas turbines.
The newest pulse technology for the 21st century, TurboPulse takes a modern approach to filter design with many new features engineered to improve filter life and pulse performance for turbomachinery.
Not all people who purchase our products are experts in air filtration and they shouldn’t have to be either. The purpose of Camfil City is to give everyone a chance to learn the basics of what our clean air solutions can do for them.
For the first time, there is a GT-specific filter efficiency standard. Discover how ISO29461-1 can help you select the right filters for any turbomachinery application.
Air quality is critical for the performance and life of your gas turbine. This infographic shows the impact of filtration, causes of poor performance, mitigation, as well as the new ISO 29461 filter standard.
Pre-filters have an important impact on the overall performance of a filtration system. Choosing the right pre-filter will extend final filter life and also improve overall efficiency.
The CamClose panel air filter is engineered for gas turbine air intake systems to provide hassle free operations, stable performance and increased protection.
Hi-Flo bag air filters and CamGT EPA air filter upgrade reduces compressor efficiency degradation by 80%, slashes 3 offline filter replacements, 7 online pre-filter replacements, and 3 offline water washes per year.
CamGT 3V-600 static final filters and Cam-Flo GT Hybrid pocket air filters eliminate 6 offline washes per year, improve gas turbine compressor efficiency, and boost power output for a Singaporean coastal cogeneration power plant.
Frequent pressure and short filter replacement intervals led to high operational costs. Camfil's Cam-Flo air intake pre-filters and CamGT EPA air filters met their goal of 8000 hours of life and reduced pressure drop by 50%.
.jpg?mode=crop&rev=106907c98929415786aca9dcefac50d9&iar=0&h=405&w=720&hash=BC23524C3474B0122DF5169EDC87214B)
Hot corrosion is a source of nonrecoverable degradation on gas turbines. It is a chemical reaction between salts, sulfur and heat, where the damages can reduce an engine’s life by up to 75%. One of the most effective methods is to eliminate the contaminants triggering the chemical reaction. This paper examines the causes of hot corrosion and assesses various methods of mitigation.
Meeting stricter marine emissions standards while continuing to run reciprocating engines will significantly increase operating costs for commercial shipping operators. To support low emissions, liquified natural gas is becoming a key marine fuel due to increasing availability and clean combustion.
Upgrade your gas turbine air inlet filters to cut carbon emissions per MWh produced.
Learn how The Value Rating, the easiest way to select air filters for gas turbines, works.
CamGT filters have been engineered to excel in extreme environments. They virtually eliminate fouling, corrosion and maintenance downtime, all at a lower and more stable pressure drop.
Designed to help identify filters that improve gas turbine efficiency, The Value Rating system is the easiest way to select air filter for gas turbines.
The CamGT air filter line has been turbo-boosted to maximize power, profits, and uptime of your gas turbine.
Read this infographic and discover: How gas turbines can play a positive role in the future energy mix; How gas turbines can improve their efficiency and carbon intensity; How you can burn less fuel and thus reduce emissions; The amount of CO2 a clean engine emits vs a fouled engine; and Static filter vs. Pulse filer features that reduce emissions
Camfil designs a static EPA retrofit gas turbine filtration solution for LM6000 turbines to ensure they deliver reliable power & heating to the district. The result of the upgrade was 3x more filter life, reduction in CO2 emissions by 1 100 tons per year, and fuel consumption savings of 650 000 Sm3 per year.
Camfil Power Systems (PS) provides filtration and acoustical solutions for turbomachinery including gas turbines, generators,industrial air compressors and diesel engines. Turbomachinery technology has evolved tremendously over the past decades.
To answer this question, let's look at the difference between a land based gas turbine and a jet engine.
What if we told you that 98% air and 2% fuel is the input of your most valuable assets, your turbines? Now what if we told you that 100% of that air contains pollutants that can damage your turbines if they’re not properly filtered?
Gas turbines are susceptible to fouling and damage if water droplets and water soluble contaminants, i.e. salts, are ingested by an engine.
During heavy storms, filters are subject to a lot of water. Both filter efficiency and pressure drop can be impacted if the filter drainage is not properly designed or the media hydrophobicity is not sufficient.
Protect your gas turbine from ice formation during high humidity and low temperatures. Insufficient icing protection may result in inlet filter system issues and ice formation at the turbine inlet.
Camfil provides the CamGT EPA air filter solution that helps reduce gas turbine compressor efficiency degradation and improves pressure drop by 40%. Three years after installation, the customer reported no filter change-outs, only 1 water wash in 3 years, and a low and stable pressure drop.
The Watson Cogeneration Plant operates 4 GE, Frame 7EA engines and produces 400 MW for local refineries and sells excess electricity to the grid. The Plant Manager requested air intake efficiency, pressure drop, and water tests from Camfil. The test results revealed the true impact of the synthetic cartridge filters on gas turbine performance.
A side by side comparison shows the benefits of higher grade GTC F9 gas turbine air intake filters for two RB211 gas turbines, even in very clean rural areas. It means a cleaner engine, higher power output, fewer water washes, and fuel savings.
An energy plant on the pacific coast upgrades their Siemens 501F gas turbine filtration to the CamGT 4V-300 air intake filters after tests show its water and salt handling capabilities.
Synthetic CamPulse GTC F9 cartridge air intake filters keeps twenty 30MW engines clean and running despite the humid and dusty desert environmental conditions.
Air sampling, CamLab on-site analysis, as well as a Life Cycle Cost analysis show that the CamGT EPA filters will result in no shutdowns for turbine water washes, final filter shutdown extended to 5 years, decreased risk of corrosion and maximum power output.
Egat North, the largest energy producer in Thailand, upgraded to Hi-Flo and CamClose air intake pre-filters as well as CamGT final EPA air filters and lowered degradation by 70%, reduced water wash requirements, and saved approximately $1.24M USD per year.
Egat North, the largest energy producer in Thailand, upgraded to Hi-Flo and CamClose air intake pre-filters as well as CamGT final EPA air filters and lowered degradation by 70%, reduced water wash requirements, and saved approximately $1.24M USD per year.
The test showed that that the CamPulse GTC gas turbine cartrdige filter upgrade would improve pressure drop and increase power output despite the salt laden, high humidity environmental conditions.
With a growing demand for greener practices, and rising operational costs, it has become imperative that gas turbine operators cut their carbon footprints. Upgraded air intake systems are one of the easiest, most cost-effective ways to meet these demands, while improving operations at the same time.
Located offshore Ivory Coast, Africa, the CamGT EPA filter solution saves Foxtrot International 3 shutdowns per year and eliminates salt corrrosion, without compromising on footprint.
Case Study: The BioGas produced is heavily laden with H2S (hydrogen sulphide), a gas that can cause corrosion and pitting inside the gas engine. A solution was required where a high level of abatement of H2S was possible and an easy filter media maintenance.
Noise complaints from neighboring communities in Thailand prompted the plants to evaluate a noise-reducing filtration system. The CamGT high efficiency air filter solution not only improved the noise levels, it also increased turbine availability, improved pressure drop and helped the gas turbine produce more power.
Huadian, a power generation company located in China, upgraded the air inlet filtration system to the GTC synthetic cartridge filters on GT PG9171E engines and improved pressure drop and availability despite the high humidity levels.
Dalkia, a leader in the French gas turbine market, launched a national comparative test for various air intake filters, including Camfil's Hi-Flo pre-filters and CamGT EPA filters, to increase power production for their 10 GE LM6000 gas turbines.
Tata Power Ltd, India's largest integrated power company requests Camfil for a Cam-Flo pocket bag filter and CamGT static air filter retrofit after heavy hot corrosion in the gas turbine and high pressure drop jeopardized performance and safety.
Gas Turbine Application: The quality of air inlet filters is essential for optimal gas turbine performance. Protecting the turbine with site-specific filtration solutions will assure profits are kept high.
Turbomachinery: Air inlet filtration systems should be designed to suit the environment. Because of market pressures, a general design has been used in widely varying environment conditions. Before making your purchase, get an assessment.
Gas Turbine Application: Do you operate in a coastal or offshore site? Unfortunately, you probably have to deal with corrosion related issues. You can, however, operate corrosion-free if you take the right measures.
After three years of operation the CamPulse GTC F9 cartridge gas turbine air filters helped improve power output, decrease filter replacement frequency, and save over $400 000 as a result of lower pressure drop.
International