GigaPleat NXPH

A V-Cell type molecular filter with a plastic frame fitted with high cleanliness embedded adsorbents for removal of VOCs, acids, and bases. Ideal for cleanroom make-up air units and air recirculation units with specific single type contaminant requirements

Low pressure drop
Low weight
Incinerable
Low outgassing components
High media cleanliness
Predicted removal efficiency and lifetime by Camfil's proprietary software
Typical target gases: VOCs, acids, bases, ozone

Item Type	Width (mm)	Height (mm)	Depth (mm)	Airflow (m3/h)	Pressure drop Average (Pa)
NXPH B	592	592	292	3300	50
NXPH B	592	287	292	1600	50
NXPH A	592	592	292	3300	60
NXPH A	592	287	292	1600	60
NXPH V	592	592	292	3300	60
NXPH V	592	287	292	1600	60

Item Type

Width (mm)

Height (mm)

Depth (mm)

Airflow (m3/h)

Pressure drop Average (Pa)

NXPH B

592

292

3300

NXPH B

592

287

292

1600

NXPH A

592

292

3300

NXPH A

592

287

292

1600

NXPH V

592

292

3300

NXPH V

592

287

292

1600

Specifications

Application

Remove airborne molecular contaminants (AMC) from recirculation air systems and make-up air systems in microelectronic or life sciences facilities and cleanrooms.

Filter Frame

Plastic molded

Media

Activated Carbon, Impregnated Activated Carbon

Max temperature (°C)

40ºC

Relative Humidity

30% - 70%

Recommended final pressure drop

Not a particulate filter. Molecular filters' initial pressure drop equals their final pressure drop. Consult with factory on end-of-life analysis.

Gasket

Polyurethane, EPDM

Sealant

Polyurethane

Installation options

Adaptor frames are available for installation above fan filter units, mini-environment or process equipment

Particle cleanliness

ISO Class 6

Comment

Gasket position: 01- downstream, 10 - upstream
Outgassing: Individually outgassing tested for VOC emissions on request

GlidePack MultiTrack 25 Air Filter Housing

Replaceable fin seal polypropylene final filter gasketing to ensure a secure filter to track seal of less than 1% across the filter at 3.0” w.g.

16-gauge galvanized steel construction with convenient out-turned standing flanges to mate to existing HVAC equipment. The flanges include moisture weeping paths so that housings are weatherproof without modification for rooftop or exterior installation. Flanges are designed to mate with other Camfil housings for those applications that may require multiple filter housings.

16-gauge galvanized steel dual-access doors for filter service from either side of the unit. The doors swing-open and engineered to be square to the housing flange to maintain a continuous door-to-housing seal.

GlidePack UniTrack 25

A 1-inch nominal size filter header track, that will hold bag filters, 6-inch deep box filters, 12-inch deep box filters.

A replaceable fin seal polypropylene filter gasket on each filter track to ensure a secure filter-to-track seal of less than 1% across the filter at 3.0” w.g.

FastFrame

16-gauge all-welded galvanized steel construction. Available in stainless steel or aluminum.

A ¾-inch sealing flange with a premium replaceable gasket to ensure no air bypass between the frame and the air filter header. The gasket includes an overlapping seal to eliminate air bypass at the frame's corners.

Final filter and prefilter compression tabs facilitate a clear snap-in-place seal for the final filter and a secure hold for the prefilter.

GigaPleat NXPH

Specifications

Documents and downloads

Related Products

GlidePack MultiTrack 25 Air Filter Housing

GlidePack UniTrack 25

FastFrame

Type 8 Frame