Gold Series Camtain

The Gold Series Camtain dry dust collector is specifically designed for applications in the pharmaceutical and chemical industry, where harmful substances are present such as APIs and therefore, containment is required to protect the operators from exposure. The modular extraction system is available for medium to high air volumes and tested to meet ATEX & NFPA standards, incorporating different explosion protection options.

  • Bag-In/Bag-Out safe-change for filters and continuous liner system for dust discharge
  • Modular system available for larger air volumes
  • Cartridges using HemiPleat filter technology
  • High-efficiency filters up to E12 99.5% at MPPS, or greater than 95% at ePM1
  • Specially treated filter media repels fine particulates for a lower pressure drop and longer filter life

Video

Specifications

Application
The Gold Series Camtain dust collector can be used in a variety of pharmaceutical and chemical applications, including tablet presses, coating, fluid bed drying, spray drying, blending, granulation and general room ventilation.
Comment
The Gold Series Camtain is perfect for high-efficiency filtration where recovery of the product is not required. Safe-change containment systems are available for both the filter cartridges and discharge system underneath the collector. The cartridge change utilizes the safe-change filter replacement method while the discharge uses continuous liner technology. The Gold Series Camtain can also support traditional dust collection for nuisance dusts and fumes that do not require full isolation and containment.

Cartridges: Poly-Tech™ media’s filtration efficiency is 99.99% on 0.5 μm and larger particles.
The Gold Series® meets the 2 mg/m³ or less emissions requirement to recirculate air back on non-hazardous dusts, in most cases.
The HemiPleat cartridge uses optimal pleat spacing with synthetic glue beads to hold the pleats open. HemiPleat breathes more air with less energy and increases the cleaning effectiveness of the reverse pulse, thus resulting in a lower pressure drop.

Documents and downloads

Related Products

Articles related to Gold Series Camtain

Improving air quality inside and around manufacturing facilities

Processes in manufacturing facilities often generate dust and fumes which for example can pose health risks for your operators or compromise the quality and safety of your products. Determining the right capture and filtration solution helps to protect against the main risks of uncontrolled emissions and thus to create safe work environments.

Food and beverage Life science and healthcare Manufacturing and Machinery Air quality

Dust collectors are necessary safety systems which have to be maintained properly

Dust collectors are necessary safety systems in many manufacturing and processing plants, thus as in the food processing industry. But if they are not designed, installed and maintained properly, these systems themselves can cause serious problems. In this eBook we highlight 10 ways how to make sure your dust collection system is up to the tasks of keeping workers safe, maximising production uptime and meeting regulatory compliance.

Food and beverage Life science and healthcare Manufacturing and Machinery

dust collector Total Cost of Ownership

When purchasing dust collection systems and filter cartridges, the initial purchase price is just the tip of the iceberg. The true costs – energy, consumables and operations – are lurking below the surface. The good news is that there are ways to reduce these costs over the long term.

Food and beverage Life science and healthcare Manufacturing and Machinery Innovation Technology and Research

Mitigate combustion risks & protect from dust explosions

Almost all industrial manufacturing, processing or packaging applications generate dust as a side effect. Many of these dusts are both combustible as well as explosive, and removing them from the work place can significantly reduce the risk of serious accidents. It is estimated that there are approximately 2,000 dust explosions in Europe annually. Most of these are minor but some are very destructive. So by extracting the dust, the risk in the production is reduced, but unless the extraction system is safe the risk is just moved.

Food and beverage Life science and healthcare Manufacturing and Machinery

hemipleat filters capture & release more pollutants when pulse-cleaned

HemiPleat is, in short, the uniquely, patented media pleating technology Camfil use to create highly efficient filter cartridges that outlast and outperform competitors alternatives.

Food and beverage Life science and healthcare Manufacturing and Machinery

selecting the right filter media for your industrial applications

Dust collection systems are an important part of any manufacturing process, so they need to be sized and designed properly. One critical design component is specifying the proper filtration media, which requires analysis of the dust in the process and all operating conditions.

Food and beverage Life science and healthcare Manufacturing and Machinery

Protection Against Pharmaceutical Processes That Produce Dust & Potent Compounds 

Protection Against Pharmaceutical Processes That Produce Dust & Potent Compounds 

Life science and healthcare

Camtain® Contains Explosive Pharma Dust

Case Study: Camtain Contains Explosive Pharma Dust. A multinational pharmaceutical company needed a dust extraction system for their new tableting suite in Spain. The suite comprised of six rooms, each with its own tablet machine that created explosive dusts.

Life science and healthcare Case Studies

Let Camfil be your clean air partner. Contact us today!
Dublin
+353 1 8484977
Contact us
international contacts