Turbomachinery equipment are critical pieces of equipment that ingest large quantities of air. A gas turbine intake, for example, ingests up to 98% air and 2% fuel. Air quality is critical for the performance and life of the equipment and directly impacts an operator’s availability, reliability and profitability. Whether you operate a gas turbine, wind turbine, large industrial air compressor, or other turbomachinery, high quality air filtration will quickly bring important benefits to your bottom line.
Environmental and operational conditions can vary drastically with each site, therefore, the required filter solution should not only be efficient but also adapted to your local site conditions and challenges.
The following Insight articles cover a wide variety of topics that will help you improve your overall operations.
Did you know Camfil have a full range of retrofit filters that can be utilised in all the most common brands on the market. Camfil filters are not just designed to work but to optimise your dust extraction systems performance
Food and beverage Life science and healthcare Energy and Power Systems Manufacturing and machinery
A leading steel producer upgraded blower filtration, extending final filter life by 16x, pre-filter life by 4x, and achieving 100% operational availability.
Energy and Power Systems Case studies
Leveraging years of extensive data, new technologies have been engineered to form a new generation of pulse air filters. This eBook highlight the four innovative technologies designed to enhance the performance of your filters and your gas turbines.
Selecting the right filters to protect your gas turbine fleet can mean the difference between trouble-free, high-output operations and short filter life, de-rates and increased downtime.
Prepare for the upcoming rain and storms with a thorough inspection of your air intake system.
The newest pulse technology for the 21st century, TurboPulse takes a modern approach to filter design with many new features engineered to improve filter life and pulse performance for turbomachinery.
The first international test standard that rates a filter’s endurance in fog and mist environments and determines a filter’s resistance to water penetration
ISO 29461: Turbomachinery air intake filter standards
Not all people who purchase our products are experts in air filtration and they shouldn’t have to be either. The purpose of Camfil City is to give everyone a chance to learn the basics of what our clean air solutions can do for them.
Dyna Mig had a competitor dust collector solution that regularly caused costly downtime. With the help of Camfil’s expertise and a flagship Camfil Gold Series GSX dust collector system, Dyna Mig was able to eliminate all unscheduled downtime and cut their heating costs to a minimum – as well as work safer.
Camfil has provided container manufacturer AMG with a much more effective dust and fume extraction system offering higher filtration rates. A system that is also more sustainable thanks to reduced energy consumption and longer filter lifetime.
For the first time, there is a GT-specific filter efficiency standard. Discover how ISO29461-1 can help you select the right filters for any turbomachinery application.
Air quality is critical for the performance and life of your gas turbine. This infographic shows the impact of filtration, causes of poor performance, mitigation, as well as the new ISO 29461 filter standard.
The wastewater undergoes a long process at Middelfart Wastewater, where the wastewater is treated and at the end of the process it eventually becomes purified water which is then released to the sea surrounding Middelfart. In addition, the byproducts biogas is converted to electricity and heat as well as bio-fertilizer that is being used on farmers’ fields.
ISO 29461-1 is the first international test standard for reporting the efficiency for the entire range of air intake filters for gas turbines, compressors, and other turbomachinery applications.
Hydrogen sulphide is one of the major contaminants that needs to be eliminated from biogas production as part of the purification. This can be achieved using mobile activated carbon filters that remove harmful gases and odours from the process.
Clean air at a disused nuclear power plant operated by Barsebäck Kraft AB (BKAB) in Sweden. The used nuclear fuels were removed a long time, but demolishing the nuclear power plant is a dirty job that requires maximum safety and control. To keep the air clean in the demolition process, air purifiers from Camfil were used.
The CamClose panel air filter is engineered for gas turbine air intake systems to provide hassle free operations, stable performance and increased protection.
With this project, the TU Delft Solar Boat Team works together with the maritime sector to accelerate the transition to green energy. There is still a lot to be gained in this sector and by thinking together with the maritime world and innovating in the field of sustainability, the team contributes to a better and greener future. Because only together we can make a change.
CamPure 32 is the new ideal Camfil media for the removal of hydrogen sulfide during the production of biogas in an anaerobic process. Learn how this farm in France applied the high quality chemical absorbent media to their biogas application.
Hi-Flo bag air filters and CamGT EPA air filter upgrade reduces compressor efficiency degradation by 80%, slashes 3 offline filter replacements, 7 online pre-filter replacements, and 3 offline water washes per year.
.jpg?mode=crop&rev=1dc92c976aa1414f8910ba4ba192d268&iar=0&h=405&w=720&hash=D535F695D5F365710A963FFB0679DA5A)
Hot corrosion is a source of nonrecoverable degradation on gas turbines. It is a chemical reaction between salts, sulfur and heat, where the damages can reduce an engine’s life by up to 75%. One of the most effective methods is to eliminate the contaminants triggering the chemical reaction. This paper examines the causes of hot corrosion and assesses various methods of mitigation.
Case study: CamGT and CamFlo filters eliminate 6 offline washes per year, improve compressor efficiency, and boost power output, for a Singaporean coastal cogeneration power plant.
The CamGT air filter line has been turbo-boosted to maximize power, profits, and uptime of your gas turbine.
Meeting stricter marine emissions standards while continuing to run reciprocating engines will significantly increase operating costs for commercial shipping operators. To support low emissions, liquified natural gas is becoming a key marine fuel due to increasing availability and clean combustion.
Learn more about how air filtration impacts turbomachinery performance, and what you can do to turboboost performance.
Designed to help identify filters that improve gas turbine efficiency, The Value Rating system is the easiest way to select air filter for gas turbines.
CamGT filters have been engineered to excel in extreme environments. They virtually eliminate fouling, corrosion and maintenance downtime, all at a lower and more stable pressure drop.
Learn how The Value Rating, the easiest way to select air filters for gas turbines, works.
The test showed that that the CamPulse GTC gas turbine cartrdige filter upgrade would improve pressure drop and increase power output despite the salt laden, high humidity environmental conditions.
Egat North, the largest energy producer in Thailand, upgraded to Hi-Flo and CamClose air intake pre-filters as well as CamGT final EPA air filters and lowered degradation by 70%, reduced water wash requirements, and saved approximately $1.24M USD per year.
Egat North, the largest energy producer in Thailand, upgraded to Hi-Flo and CamClose air intake pre-filters as well as CamGT final EPA air filters and lowered degradation by 70%, reduced water wash requirements, and saved approximately $1.24M USD per year.
Air sampling, CamLab on-site analysis, as well as a Life Cycle Cost analysis show that the CamGT EPA filters will result in no shutdowns for turbine water washes, final filter shutdown extended to 5 years, decreased risk of corrosion and maximum power output.
Synthetic CamPulse GTC F9 cartridge air intake filters keeps twenty 30MW engines clean and running despite the humid and dusty desert environmental conditions.
An energy plant on the pacific coast upgrades their Siemens 501F gas turbine filtration to the CamGT 4V-300 air intake filters after tests show its water and salt handling capabilities.
Low pressure drop GTC air filters minimize filter replacement requirements, improve power output, and lower fuel consumption.
A side by side comparison shows the benefits of higher grade GTC F9 gas turbine air intake filters for two RB211 gas turbines, even in very clean rural areas. It means a cleaner engine, higher power output, fewer water washes, and fuel savings.
The Watson Cogeneration Plant operates 4 GE, Frame 7EA engines and produces 400 MW for local refineries and sells excess electricity to the grid. The Plant Manager requested air intake efficiency, pressure drop, and water tests from Camfil. The test results revealed the true impact of the synthetic cartridge filters on gas turbine performance.
Camfil provides the CamGT EPA air filter solution that helps reduce gas turbine compressor efficiency degradation and improves pressure drop by 40%. Three years after installation, the customer reported no filter change-outs, only 1 water wash in 3 years, and a low and stable pressure drop.
Frequent pressure and short filter replacement intervals led to high operational costs. Camfil's Cam-Flo air intake pre-filters and CamGT EPA air filters met their goal of 8000 hours of life and reduced pressure drop by 50%.
During heavy storms, filters are subject to a lot of water. Both filter efficiency and pressure drop can be impacted if the filter drainage is not properly designed or the media hydrophobicity is not sufficient.
Gas turbines are susceptible to fouling and damage if water droplets and water soluble contaminants, i.e. salts, are ingested by an engine.
What if we told you that 98% air and 2% fuel is the input of your most valuable assets, your turbines? Now what if we told you that 100% of that air contains pollutants that can damage your turbines if they’re not properly filtered?
The biogas process is critical as it releases heavily contaminated gasses that can cause engine corrosion and equipment abrasion, causing unscheduled downtime for maintenance and repair, which results in loss of output and profit. Luckily, there are several ways of solving molecular filtration in biogas plants with different types of filter media in deep beds.
Camfil Power Systems (PS) provides filtration and acoustical solutions for turbomachinery including gas turbines, generators,industrial air compressors and diesel engines. Turbomachinery technology has evolved tremendously over the past decades.
Read this infographic and discover: How gas turbines can play a positive role in the future energy mix; How gas turbines can improve their efficiency and carbon intensity; How you can burn less fuel and thus reduce emissions; The amount of CO2 a clean engine emits vs a fouled engine; and Static filter vs. Pulse filer features that reduce emissions
Hinkley Point C in Somerset, United Kingdom is amongst the safest and most efficient nuclear power generator that is type of a Pressurised Water Reactor (PWR). With hundreds of megawatts electrical production in planning, safety of the process becomes a key concern.
Camfil designs a static EPA retrofit gas turbine filtration solution for LM6000 turbines to ensure they deliver reliable power & heating to the district. The result of the upgrade was 3x more filter life, reduction in CO2 emissions by 1 100 tons per year, and fuel consumption savings of 650 000 Sm3 per year.
Upgrade your gas turbine air inlet filters to cut carbon emissions per MWh produced.
Protect your gas turbine from ice formation during high humidity and low temperatures. Insufficient icing protection may result in inlet filter system issues and ice formation at the turbine inlet.
To answer this question, let's look at the difference between a land based gas turbine and a jet engine.
With a growing demand for greener practices, and rising operational costs, it has become imperative that gas turbine operators cut their carbon footprints. Upgraded air intake systems are one of the easiest, most cost-effective ways to meet these demands, while improving operations at the same time.
Located offshore Ivory Coast, Africa, the CamGT EPA filter solution saves Foxtrot International 3 shutdowns per year and eliminates salt corrrosion, without compromising on footprint.
If you are looking to expand your knowledge on the impact of air filtration on your gas turbines and other turbomachinery, look no more!
Tata Power Ltd, India's largest integrated power company requests Camfil for a Cam-Flo pocket bag filter and CamGT static air filter retrofit after heavy hot corrosion in the gas turbine and high pressure drop jeopardized performance and safety.
Case Study: North Sea Oil Rig Accommodation Areas. Employees at the North Sea Oil Rig needed cleaner air in common spaces such as television rooms and accommodation spaces. Find out how Camfil and MSV Regalia improved the air with 24/7 usage of a filtration system.
Huadian, a power generation company located in China, upgraded the air inlet filtration system to the GTC synthetic cartridge filters on GT PG9171E engines and improved pressure drop and availability despite the high humidity levels.
Dalkia, a leader in the French gas turbine market, launched a national comparative test for various air intake filters, including Camfil's Hi-Flo pre-filters and CamGT EPA filters, to increase power production for their 10 GE LM6000 gas turbines.
Noise complaints from neighboring communities in Thailand prompted the plants to evaluate a noise-reducing filtration system. The CamGT high efficiency air filter solution not only improved the noise levels, it also increased turbine availability, improved pressure drop and helped the gas turbine produce more power.
After three years of operation the CamPulse GTC F9 cartridge gas turbine air filters helped improve power output, decrease filter replacement frequency, and save over $400 000 as a result of lower pressure drop.
Gas Turbine Application: Do you operate in a coastal or offshore site? Unfortunately, you probably have to deal with corrosion related issues. You can, however, operate corrosion-free if you take the right measures.
Turbomachinery: Air inlet filtration systems should be designed to suit the environment. Because of market pressures, a general design has been used in widely varying environment conditions. Before making your purchase, get an assessment.
Gas Turbine Application: The quality of air inlet filters is essential for optimal gas turbine performance. Protecting the turbine with site-specific filtration solutions will assure profits are kept high.
Australia