Being in the manufacturing industry, you know that virtually every process creates some type of dust, mist or fume. It is important to protect employees and equipment on a day-to-day basis. Air filtration started in industrial facilities to protect the HVAC system and increase the yield in processes, thereby increasing profit dollars.
Large particles produced from machinery, fine particles consistent with any process that involves high activity in process or with people and gaseous contaminants are all problems that may be addressed with air filtration. Here we can show you how to protect your workers, equipment and processes in any facility.
Did you know Camfil have a full range of retrofit filters that can be utilised in all the most common brands on the market. Camfil filters are not just designed to work but to optimise your dust extraction systems performance
Food and beverage Life science and healthcare Energy and Power Systems Manufacturing and machinery
Processes in manufacturing facilities often generate dust and fumes which for example can pose health risks for your operators or compromise the quality and safety of your products. Determining the right capture and filtration solution helps to protect against the main risks of uncontrolled emissions and thus to create safe work environments.
Food and beverage Life science and healthcare Air quality Manufacturing and machineryOften the initial purchase price for air filters or dust collectors is just the tip of the iceberg. The true costs for energy, maintenance and disposal are lurking below the surface. To make the most economic decision in the long-run, a detailed calculation considering all the factors will help to reduce your overall expenditure.
Dan Bedding experienced large amounts of dust that accumulated in the air and on the equipment, which required considerable cleaning and caused a number of problems during the sewing process. In addition, the employees working in production experienced discomfort due to the amount of dust in the air. Find out how Camfil helped Dan Bedding find the best solution to the problem.
Rigorous testing of a product during its development phase is ultimately about being able to guarantee a certain level of performance. This is, of course, also true for high quality air filters like Camfil’s. And the way these products are tested has always been changing and evolving.
Austrian metalworking company turned to Camfil because they were not satisfied with the performance of their existing extraction system. Camfil´s Gold Series X-Flo dust & fume collector equipped with Dura-Pleat filter cartridges now provides a highly reliable solution for their 24/7 operation while reducing costs for filter replacement and maintenance.
When purchasing dust collection systems and filter cartridges, the initial purchase price is just the tip of the iceberg. The true costs – energy, consumables and operations – are lurking below the surface. The good news is that there are ways to reduce these costs over the long term.
Laser cutting, plasma cutting and oxy-fuel cutting are different machining processes used in the metal producing and metalworking industries, using energy in various forms to cut virtually any shape from iron and nonferrous materials out of sheets or large slabs. During the processes, the materials heat up, melt and cause harmful emissions. If not controlled properly, this airborne dust and fumes pose health risks for operators and cause damage to machinery.
Dust collection systems are all safety devices and thus state-of-the art modern methods of validation and certification are required. Furthermore it is vital to ensure that the system is still in compliance after perhaps changed process conditions, to provide maximum safety for personnel and the facility. It is also recommended to carry out quality audits, process reliability surveys and annual safety inspections.
Dust collection systems are an important part of any manufacturing process, so they need to be sized and designed properly. One critical design component is specifying the proper filtration media, which requires analysis of the dust in the process and all operating conditions.
HemiPleat is, in short, the uniquely, patented media pleating technology Camfil use to create highly efficient filter cartridges that outlast and outperform competitors alternatives.
Metalworking facilities, especially those which perform large-scale fabrication, must be diligent in controlling harmful emissions in the workplace. Removing dusts, fumes and mist generated by various processes is a must for good housekeeping, worker safety, equipment reliability and regulatory compliance including environmental legislation.
At the factory in Lunderskov, thermal cutting processes such as oxygen cutting, plasma cutting and CNC machining are carried out, and all processes are associated with individual ventilation process.
Almost all industrial manufacturing, processing or packaging applications generate dust as a side effect. Many of these dusts are both combustible as well as explosive, and removing them from the work place can significantly reduce the risk of serious accidents. It is estimated that there are approximately 2,000 dust explosions in Europe annually. Most of these are minor but some are very destructive. So by extracting the dust, the risk in the production is reduced, but unless the extraction system is safe the risk is just moved.
Dust collectors are necessary safety systems in many manufacturing and processing plants, thus as in the food processing industry. But if they are not designed, installed and maintained properly, these systems themselves can cause serious problems. In this eBook we highlight 10 ways how to make sure your dust collection system is up to the tasks of keeping workers safe, maximising production uptime and meeting regulatory compliance.
A properly designed and installed dust collection system will effectively catch, convey and separate hazardous and nuisance dusts. Our new ePoster pinpoints key areas to watch and signs to look for that will help you avoid problems with your dust collection system and to keep up process availability in your production facility.
Not all people who purchase our products are experts in air filtration and they shouldn’t have to be either. The purpose of Camfil City is to give everyone a chance to learn the basics of what our clean air solutions can do for them.
The potential for a combustible dust explosion is a reality in any industrial manufacturing facility. But operations with processes that generate combustible metal dusts are especially at risk and require special consideration when selecting an equipment supplier. Camfil´s new eBook lists seven important considerations for determining whether a dust collector equipment supplier has the knowledge necessary to keep your operation safe and compliant.
Camfil has provided container manufacturer AMG with a much more effective dust and fume extraction system offering higher filtration rates. A system that is also more sustainable thanks to reduced energy consumption and longer filter lifetime.
Health Risk of Metalworking Fluids
Metalworking facilities must be diligent in controlling harmful dust and fumes, especially those that contain harmful metal particulates from processes such as welding, thermal cutting, sanding and polishing. To better understand what should be considered when handling dust and fumes in metal processing we have created an ebook with 7 tips as a free download.
S.Silpa Co., Ltd., Thailand faced constant odor nuisance and high VOC levels in their factory. This is due to the usage of various chemicals in the printing process that generate volatile organic compounds (VOCs) when exposed to heat, such as thinner solutions, alcohols, inks, cleaning solvents, vinyl sheets.
Dealing with airborne odours, toxins and gases can be a big challenge. Learn about how Molecular Contamination Control and how it can protect against the harmful effects of these airborne contaminants.
Welding, grinding and laser/plasma cutting processes produce huge amounts of fine PM1 particles and various harmful gases that cannot be removed from the indoor air by ventilation alone.
CamCarb VG modules with loose-fill media are robust solutions suited for make-up air (outdoor air) and recirculation air systems. The primary use is the control of acidic gases that are responsible for the corrosion of electronics and electrical equipment in heavy process industries such as pulp and paper mills, petrochemical refineries, mining and metal refining operations, and wastewater treatment plants.
In the manufacturing industry air quality can be compromised by the production processes.
A repeal of the Clean Power Plan, lead by no less than the Environment Protection Agency (EPA) itself, could very well drive a spike in demand for commercial air filters.
Dust is everywhere – in our homes, workplaces and the surrounding environment. One can be annoyed with the dust piled on the surface of the bookshelf but unfortunately there is a darker side; the dust can cause allergies, health problems and expensive issues in production processes and equipment.
Hinkley Point C in Somerset, United Kingdom is amongst the safest and most efficient nuclear power generator that is type of a Pressurised Water Reactor (PWR). With hundreds of megawatts electrical production in planning, safety of the process becomes a key concern.
Case Study: Camfil APC was approached by the company to recommend suitable mist extraction equipment with the provision that it was easy to maintain.
GSX collectors are ideal for use in pharma, mining, food and chemical processing industries. They also provide a safer work environment in metalworking applications like welding and cutting.
During the process of removing the four, 28 meter high boilers, a lot of environmentally harmful materials must be handled, and the demolition process will create dust and smoke, which cannot be spread outside the building.
Case Study: Gold Series Blasts Competitor Dust Collector. JPW Companies offers a wide variety of products built to last for manufacturing companies. Installed on a blasting machine, JPW Companies originally installed a competitor's dust collector to manage the facility.
Clean Air For Leading Beverage Manufacturer. Air is the only ingredient involved in every aspect of food and beverage manufacturing. Air comes into contact with products from storage of goods all way to packaging. How can we help to keep your food processes safe?
Malaysia