The Gold Series X-Flo dust collectors handle all kinds of harmful and combustible dusts, smoke and fumes, including fine, fibrous and heavy dust loads from various industrial applications. The modular extraction system delivers maximum airflow and dust processing power for any given footprint, reducing air consumption up to 70%. Gold Series X-Flo dust collectors are tested to meet ATEX & NFPA standards and available with different explosion and fire protection options.
Processes in manufacturing facilities often generate dust and fumes which for example can pose health risks for your operators or compromise the quality and safety of your products. Determining the right capture and filtration solution helps to protect against the main risks of uncontrolled emissions and thus to create safe work environments.
Food and beverage Dust fume and mist extraction Life science and healthcare Air quality Manufacturing and machinery
Dust collection systems are an important part of any manufacturing process, so they need to be sized and designed properly. One critical design component is specifying the proper filtration media, which requires analysis of the dust in the process and all operating conditions.
Food and beverage Dust fume and mist extraction Life science and healthcare Manufacturing and machineryThis case study highlights the safe handling of combustible food dust with ATEX regulation compliance and increased savings.
Food and beverage Dust fume and mist extraction Case studies
Austrian metalworking company turned to Camfil because they were not satisfied with the performance of their existing extraction system. Camfil´s Gold Series X-Flo dust & fume collector equipped with Dura-Pleat filter cartridges now provides a highly reliable solution for their 24/7 operation while reducing costs for filter replacement and maintenance.
Dust fume and mist extraction Case studies Manufacturing and machinery
Camfil´s Gold Series dust collector allows French life science company significant savings on energy costs and to safely handle ST1 explosive dust from carding process of alginate fibers.
Dust fume and mist extraction Life science and healthcare Case studies
HemiPleat is, in short, the uniquely, patented media pleating technology Camfil use to create highly efficient filter cartridges that outlast and outperform competitors alternatives.
Food and beverage Dust fume and mist extraction Life science and healthcare Manufacturing and machinery
Handling dust produced due to sugar can be challenging as it is explosive, sticky and abrasive. In this facility, the customer produces soft gummy sweet sugar coated candy and required an efficient and reliable dust extraction solution for a new packaging line.
Food and beverage Dust fume and mist extraction Air quality Case studies
Case Study: Gold Series Blasts Competitor Dust Collector. JPW Companies offers a wide variety of products built to last for manufacturing companies. Installed on a blasting machine, JPW Companies originally installed a competitor's dust collector to manage the facility.
Learn more on how Camfil´s GoldLink Connect remote monitoring system helped a metalworking company to significantly reduce power consumption and compressed air consumption on their dust collectors.
Food and beverage Dust fume and mist extraction Life science and healthcare Case studies Manufacturing and machinery
AMG's new production facility did not meet local regulations regarding exposure to dust, fumes, and gases and the company required better performing dust collectors. With a Gold Series X-Flo dust collection system, the company now has a more effective system with higher filtration rate and more sustainability.
When purchasing dust collection systems and filter cartridges, the initial purchase price is just the tip of the iceberg. The true costs – energy, consumables and operations – are lurking below the surface. The good news is that there are ways to reduce these costs over the long term.
Food and beverage Dust fume and mist extraction Life science and healthcare Manufacturing and machinery Innovation technology and research
Laser cutting, plasma cutting and oxy-fuel cutting are different machining processes used in the metal producing and metalworking industries, using energy in various forms to cut virtually any shape from iron and nonferrous materials out of sheets or large slabs. During the processes, the materials heat up, melt and cause harmful emissions. If not controlled properly, this airborne dust and fumes pose health risks for operators and cause damage to machinery.
Dust collection systems are all safety devices and thus state-of-the art modern methods of validation and certification are required. Furthermore it is vital to ensure that the system is still in compliance after perhaps changed process conditions, to provide maximum safety for personnel and the facility. It is also recommended to carry out quality audits, process reliability surveys and annual safety inspections.
Food and beverage Dust fume and mist extraction Life science and healthcare Manufacturing and machinery
Almost all industrial manufacturing, processing or packaging applications generate dust as a side effect. Many of these dusts are both combustible as well as explosive, and removing them from the work place can significantly reduce the risk of serious accidents. It is estimated that there are approximately 2,000 dust explosions in Europe annually. Most of these are minor but some are very destructive. So by extracting the dust, the risk in the production is reduced, but unless the extraction system is safe the risk is just moved.
Food and beverage Dust fume and mist extraction Life science and healthcare Manufacturing and machinery
A properly designed and installed dust collection system will effectively catch, convey and separate hazardous and nuisance dusts. Our new ePoster pinpoints key areas to watch and signs to look for that will help you avoid problems with your dust collection system and to keep up process availability in your production facility.
Food and beverage Dust fume and mist extraction Life science and healthcare Manufacturing and machinery
Dust collectors are necessary safety systems in many manufacturing and processing plants, thus as in the food processing industry. But if they are not designed, installed and maintained properly, these systems themselves can cause serious problems. In this eBook we highlight 10 ways how to make sure your dust collection system is up to the tasks of keeping workers safe, maximising production uptime and meeting regulatory compliance.
Food and beverage Dust fume and mist extraction Life science and healthcare Manufacturing and machinery
The potential for a combustible dust explosion is a reality in any industrial manufacturing facility. But operations with processes that generate combustible metal dusts are especially at risk and require special consideration when selecting an equipment supplier. Camfil´s new eBook lists seven important considerations for determining whether a dust collector equipment supplier has the knowledge necessary to keep your operation safe and compliant.
Dyna Mig had a competitor dust collector solution that regularly caused costly downtime. With the help of Camfil’s expertise and a flagship Camfil Gold Series GSX dust collector system, Dyna Mig was able to eliminate all unscheduled downtime and cut their heating costs to a minimum – as well as work safer.
Dust fume and mist extraction Energy and Power Systems Case studies Manufacturing and machinery
Metalworking facilities must be diligent in controlling harmful dust and fumes, especially those that contain harmful metal particulates from processes such as welding, thermal cutting, sanding and polishing. To better understand what should be considered when handling dust and fumes in metal processing we have created an ebook with 7 tips as a free download.
Welding, grinding and laser/plasma cutting processes produce huge amounts of fine PM1 particles and various harmful gases that cannot be removed from the indoor air by ventilation alone.
Dust fume and mist extraction Air quality Manufacturing and machinery
.jpg?h=200&iar=0&w=200&rev=d60032e2a7094567a45c1e8f58fd35f0&mode=crop&hash=21D2B4323F20D3B80E22FE17168C6A7B)
A Canadian-based provider of wholesale French and Asian-style cakes and pastries that ship to restaurants and grocery stores throughout North America turned to Camfil when it needed a dust collector. The requirements for the dust collector included the ability to collect flour, sugar, baking and dry mix dust from ingredients being dropped into mixers, augers and bin dumpers.
Food and beverage Dust fume and mist extraction Case studies
In domestic situations, dust can often be swept under the carpet, both figuratively and literally. This is not the case on construction sites and in factories where dust is a health threat that can, at its extreme, result in fatalities.
Case Study. Food Producer Builds Appetite For Gold Series. Nestle wanted a turnkey installation and a guaranteed price for a dust collection system at their frozen dinner plant. The application called for two collectors to handle the various types of spices and additives.
Case Study: Eliminating Dust Clouds At Midwest PMS. Midwest PMS is a manufacturer of liquid supplements for livestock that are custom blended per order to various customers in the US. Their fully automated batching system combines an order’s various ingredients by weight.
International
